Answered: How to flash a fresh stock firmware onto the Mobicel Solo Dual SIM (P9120)

Below are the steps you are to follow to flash the Mobicel Solo Tablet (the single SIM model):

1. Download and extract the SP Flash Tool
2. Install the MTK USB VCOM drivers
3. Download and extract the Mobicel Solo Tablet firmware from [HERE]
4. Launch the SP Flash Tool
5. Load the Scatter and navigate to the extracted firmware folder and select the text scatter file
6. Untick 'Preloader.bin'
7. Click Download - and connect the Mobicel Solo through a USB cable while it is off and Vol down pressed
8. The Solo Tab should be picked up and the flashing should soon start. The entire process should take 5 min or less and you should get a green tick when all is do
9. Disconnect and power the Mobicel Solo Tablet on