- Order, download and extract the ROM & Flasher from here: http://roms.satechhelp.co.za/product/mobicel-clicka-firmwarerom-bin/
- Install the MTK VCOM Drivers http://satechhelp.co.za/5834/Install-Mediatek-Preloader-Usb-Vcom-Drivers
- Open the FlashTool
- Double click 'Flash_tool.exe' > click OK
- Click on 'Scatter/Config file'
- Browse throw to the extracted ROM folder > open it > you will see: E233_VOO5_20151117.cfg
- Double click that
- Click download
- Connect the Mobicel Clicka while it is off
- The download should complete in about two minutes
- Then you con disconnect and power on
↧
Answered: Flashing a stock firmware or ROM onto the Mobicel Clicka
↧