Quantcast
Channel: SA tech Q&A - Recent questions and answers in Phones & Tablets
Viewing all articles
Browse latest Browse all 6029

Answered: How to flash the MTN Steppa 2 LTE ROM images using fastboot

$
0
0
  1. Order, download and extract the ROM [here]
  2. Download and install this ADB/Fastboot tool (just type Y followed by enter until you get 'All done'
  3. Download and install the Driver here (32 or 64 bits)
  4. While the MTN Steppa LTE is off, pressing Vol- and the Power key at the same time until you see the a Green screen (Which will be the Fastboot mode).
  5. Connect it to the PC > ADB Booloader Interface driver should install and complete
  6. Open the extracted ROM folder > copy the 'system.img' file > navigate to your C: drive and you will see a folder named 'adb' > open it and paste that 'system' file
  7. Place you cursor in the white area of the folder > hold the Shift key and right-click > on the right click menu > click; Open command window here
  8. Type: fastboot
  9. Then click Enter
  10. Type: fastboot devices
  11. Click Enter > you should see something like: 123JHJH566 fastboot
  12. Type: fastboot flash system system.img
  13. And click Enter
  14. It should be done in about a minute of two> then disconnect the phone > Remove and install the battery > boot into recovery > wipe data via recovery > reboot and then wait and observer

We can flash the device for you remotely for a fee if you prefer - let us know here: http://roms.satechhelp.co.za/contactus/


Viewing all articles
Browse latest Browse all 6029

Trending Articles