Quantcast
Channel: SA tech Q&A - Recent questions and answers in Phones & Tablets
Viewing all articles
Browse latest Browse all 6029

Answered: VDF200 firmware, ROM or Flash File is .pac format

$
0
0

NB: ROM taken down until further notice.

The ROM is available here: http://roms.satechhelp.co.za/product/vodafone-vdf200-firmwarerom-pac/ and below are flashing steps via ReseachDownloader. Download and extract the ROM

  1. Download the pack here (Spreadtrum_Flasher + Drivers) and extract it
  2. Install the Spreadtrum drivers (32/64 bit - depending on you system) and also add THIS
  3. Turn off Windows Firewall
  4. Then open the extracted Spreadtrum_Flasher + Drivers folder > open the ROM Flasher folder > double click on the 'ReaserchDownlod' file with a black chip and two green arrows icon
  5. With the flasher loaded > click on the gear icon on the far left > browse to and load the VDF200 .pac firmware file by double clicking on it
  6. Then click the Play like icon (Start Downloading)
  7. The connect the VDF200 table with volume down held down
  8. The download should start > proceed and end up at 100% ---
  9. At which stage click the Stop icon (Square)
  10. Disconnect and power up the VDF200.
  11. Let us know should you have issues.

Viewing all articles
Browse latest Browse all 6029

Trending Articles