Answered: How to flash a stock ROM or firmware onto the AG Zenith

Hey Geek - Follow the below steps to try and flash/download a stock ROM or firmware onto your AG Zenith device.

1. First download and install/extract the following: SP Flash Tool
2. Also download and extract the AG Zenith firmware or ROM from [ROM Download]. 
3. Install the MediaTek Preloader USB VCOM drivers as per the tutorial here
4. Launch the SP Tool from the extracted folder
5. Click 'Scatter-Loading' > browse to and locate the scatter file from your extracted firmware or ROM folder files
6. Make sure 'Preloader' NOT ticked :)
7. Then click on the Download button
8. Connect the AG Zenith to the computer via a compatible USB cable so computer can detect and connect to its system
9. The flashing process should then start with progress bars (red being the first) and you should get a green cycle with a white tick and the text 'Download OK' when the flashing is completed. At which stage you can safely disconnect the your AG Zenith device and power it on for a re-setup.

NOTE:We can flash the device for you remotely (over the internet) for R100 If you are not comfortable flashing the device yourself. Read more  here