- First download and install/extract the following: SP Flash Tool
- Source the ROM from here: http://roms.satechhelp.co.za/product/vodafone-vfd100-firmwarerom-mt6572/ ... download and extract its archieve
- Install the MediaTek Preloader USB VCOM drivers as per the tutorial here
- Launch the SP Tool from the extracted folder
- Click on the Download tab
- Click 'Scatter-Loading' > browse to and locate the scatter file from your extracted firmware files
- Make sure 'Preloader.bin' is unticked (not checked).
- With the VFD100 turned off and disconnected, click on the Download button
- Remove and replace the battery and then connect the VFD200 to the computer via a compatible USB so computer can detect and connect to its system
- The flashing process should then start with progress bars and you should get a green cycle with a white tick and the text 'Download OK' when the flashing is completed. At which stage you can safely disconnect the your Vodafone VFD100 device and power it on for a re-setup.
↧
Answered: Vodafone VFD100 firmware and flashing steps
↧