Follow the foregoing step to get by the firmware updating or flashing process.
- First download and extract the following: SP Flash Tool and the Mobicel Metro II firmware pack from here.
- Install the MediaTek drivers as per the tutorial here
- Launch the SP Tool from the extracted folder by double clicking 'Flash_tool.exe
- With the SP Flash Tool launched lick on the Download tab
- Click 'Scatter-Loading' > browse to and locate the scatter file from your extracted Mobicel Metro II firmware files folder.
- Make sure 'Preloader' is unchecked (NOT checked).
- Connect the Mobicel Metro II via USB without the battery.
- Then click on the Download button with a green arrow on top
- Quickly install the battery so the computer can detect and connect to the Mobicel Metro II system
- The flashing process should start with a red/purple/yellow progress bars and you should get a green cycle with a white tick and the text 'Download OK' when the flashing is completed. At which stage you can safely disconnect the table and power it on for a re-setup.