- Download and extract the SP Flash Tool from here.
- Order > Download and extract the ZTE Maxx ROM or firmware from [here]
- Install the Mediatek VCOM drivers as per the tutorial here
- Launch the SP Flash Tool
- Click on 'Scatter loading' > browse through to extracted ZTE Maxx ROM folder > and double click to load the .txt scatter file onto the SP Tool
- Remove the check mark next to 'preloader'
- Click on the Format tab > Auto format flash > Format flash (Except bootloader) > click Start > turn off the ZTE Maxx and connect it via USB cable.
- You should so get a 'Format OK' message > Disconnect the phone
- Click the Download tab > click Download with a green arrow
- Connect the ZTE Maxx to the computer via USB cable while off again. The download should take a bot longer - perhaps 10min. You get a Download OK message
- At you which stage you can disconnect the ZTE Maxx and power is on and observe.
↧
Answered: How to fully flash a ROM or firmware on the ZTE Maxx marketed in South Africa
↧