- Download and extract the SP Flash Tool from here.
- Order > Download and extract the Alcatel One Touch Pixi 2 (4016x) ROM or firmware from [here]
- Install the Mediatek VCOM drivers as per the tutorial here
- Launch the SP Flash Tool
- Click on 'Scatter loading' > browse through to extracted Alcatel One Touch Pixi 2 (4016x) ROM folder > and double click to load the .txt scatter file onto the SP Tool
- Remove the check mark next to 'preloader'
- Click on the Format tab > Auto format flash > Format flash (Except bootloader) > click Start > turn off the Alcatel One Touch Pixi 2 (4016x) and connect it via USB cable.
- You should so get a 'Format OK' message > Disconnect the phone
- Remove and replace the babttery
- Click the Download tab > click Download with a green arrow
- Connect the Alcatel One Touch Pixi 2 (4016x) to the computer via USB cable while off again. The download should take a bot longer - perhaps 10min. You get a Download OK message
- At you which stage you can disconnect the Alcatel One Touch Pixi 2 (4016x) and power is on and observe.
↧
Answered: How to reload a ROM, firmware or main software onto the Alcatel One Touch Pixi 2 (4016x)
↧